RF Characterization of Diamond Schottky p-i-n Diodes for Receiver Protector Applications

Contributors:   Harshad Surdi, Mohammad Faizan Ahmad, Franz Koeck, Robert J. Nemanich, Stephen Goodnick, and Trevor J. Thornton

ABSTRACT

Diamond Schottky p-i-n diodes have been grown by plasma-enhanced chemical vapor deposition (PECVD) and incorporated as a shunt element within coplanar striplines for RF characterization. The p-i-n diodes have a thin, lightly doped n-type layer that is fully depleted by the top metal contact, and they operate as high-speed Schottky rectifiers. Measurements from dc to 25 GHz confirm that the diodes can be modeled by a voltage-dependent resistor in parallel with a fixed-value capacitor. In the OFF state with a dc bias of 0 V, the diode insertion loss is less than 0.3 dB at 1 GHz and increases to 14 dB when forward biased to 7.6 V. With a contact resistance, R C , of 0.25 mΩ·cm 2 and an OFF capacitance, C OFF , of 17.5 nF/cm 2 , the diodes have an RF figure of merit F oc = (2π R C C OFF ) -1 of 36.5 GHz. The RF model suggests that reducing R C to less than 5 × 10 -5 Ω·cm 2 will enable input power rejection exceeding 30 dB. Compared to conventional silicon or compound semiconductor based power limiters, the superior thermal conductivity of the diamond Schottky p-i-n diodes makes them ideally suitable for RF receiver protectors (RPs) that require high power handing capability.

Publisher: IEEE,   Volume: 30,   1141 - 1144 ||  ISSN: 1558-1764 ||   Published: 2020-10 ||   PDF (635.61 KB) ||   Read More...