Chemical, electrical, and structural properties of Au/Pd contacts on chemical vapor cleaned p-type GaN surfaces

Contributors:   P.J. Hartlieb, A. Roskowski, B.J. Rodriguez, Robert J. Nemanich, and R.F. Davis

ABSTRACT

The chemical, electrical, and microstructural properties of Au/Pd contacts on p-type GaN(0001) surfaces previously cleaned either ex situ or ex situ and in situ have been investigated. The in situ process involved a high temperature, NH3-based chemical vapor clean (CVC); it produced ordered, stoichiometric, p-type GaN surfaces with no detectable C and an O constituent which was subsequently reduced from 15 at% on the ex situ treated surface to 2 ± 1 at% following the CVC process. The Pd contacting layer grew epitaxially in a layer-by-layer mode on the CVC surface and formed an abrupt, unreacted metal-semiconductor interface. The Au capping layer also grew epitaxially on the Pd. Au/Pd contacts on both HCl and CVC treated surfaces exhibited identical surface roughness values (RMS) in the as-deposited state and following a 500°C anneal. Contact structures on CVC treated surfaces demonstrated excellent high-temperature microstructural stability as evidenced by the absence of significant change in the surface roughness (RMS) with successive annealing at 600 and 700°C. Identical contact structures on ex situ cleaned surfaces exhibited poor high temperature microstructural stability, as indicated by a significant increase in the surface roughness (RMS) following successive anneals at 600 and 700°C. There was a significant degradation in the morphology of both surfaces following the 800°C anneal as evidenced by the formation of large voids in the contact metallization and the exposure of the underlying p-type GaN substrate. The lowest resistance contact structures with uniform metal coverage were obtained for Au/Pd contacts on a CVC treated surface annealed at 700°C.

Publisher: Materials Research Society Symposium Proceedings,   Volume: 693,   737-742 ||  Published: 2001-11 ||   Read more...